Open · 7 days, 7am–10pmHead office St Albans · Herts · Beds · Bucks · London
  1. Home
  2. How long does an EICR take?

How long does an EICR take?

About two hours for a small flat and three to four for a three-bed house. Here are eight of our own visits with the real times, what makes one take longer, and how to get ready.

SEG engineer testing a consumer unit with a multifunction tester

Looking for how long an EICR is valid for? See how long does an EICR last?

The short answer

About two hours for a small flat and three to four hours for a three-bed house. An Electrical Installation Condition Report (EICR) is a test of every circuit, so the time depends mostly on how many circuits there are and how easy the fuse board and fittings are to reach.

PropertyTypical time on site
Studio or 1-bed flatAround 2 hours
2-bed flat or house2 to 3 hours
3-bed house3 to 4 hours
4-bed or larger houseHalf a day or more
HMO or property with several fuse boardsMost of a day

Eight of our own EICRs, timed

These are real visits to homes in Hertfordshire, with the time our engineer spent on site taken from our job records. Customers are not named.

Where and whenTime on siteWhat happened
Watford (WD17), July 20262 hoursEICR only.
Watford (WD18), January 20262 hoursEICR only.
Watford (WD25), March 20262 hours 15 minutesEICR on a tenanted property.
A flat in St Albans (AL1), July 20262 hours 20 minutesTested and found Satisfactory.
A three-bed house in Rickmansworth (WD3), October 20263 hoursA burning immersion heater connection found and fixed on the spot. See the job.
St Albans (AL2), September 20263 hours 30 minutesA 35-year-old installation with no previous reports. Four potentially dangerous faults found.
Watford (WD17), November 20253 hours 30 minutesEICR, plus four faults traced and fixed on the same visit. See the job.
Chiswell Green (AL2), September 20265 hours 30 minutesEICR, plus four faults fixed on the same visit, including a kitchen circuit split in two.

So a straightforward test of a flat or small house took about two hours. Older wiring and faults that needed tracing took it to three or three and a half. The longest visit was one where we put four faults right before leaving.

What makes an EICR take longer

  • More circuits. This is the main one. Each circuit is tested separately, so a house with 14 circuits takes longer than a flat with 6.
  • More than one fuse board, for example one in the house and another in a garage, annexe or outbuilding.
  • Access. A fuse board behind a full cupboard, sockets behind heavy furniture, a loft that is hard to get into.
  • Older wiring with no previous reports, where nothing is labelled and every circuit has to be identified first.
  • A fault that needs tracing. In Watford a high reading on the kitchen ring meant splitting the circuit and opening sockets until we found a melted connector.
  • Fixing things on the day. If you approve the work, we often put faults right on the same visit. That adds time but saves a second appointment.

Will the power be off the whole time?

No. The power is off for parts of the visit, and we switch circuits off one at a time where we can. Plan for it all the same:

  • Tell us about anything that must stay on, such as medical equipment, before we start.
  • Fridges and freezers will be off for a while. Keep the doors shut.
  • The wifi router and anything plugged in will go off, so save your work if you are working from home.
  • Landlords: tell the tenants in advance.

How to get ready, and save time

None of this needs tools or covers taken off, and it often saves a second visit.

  1. Clear the way to the fuse board, the loft hatch, under-stairs cupboards, the garage and any shed or outbuilding with power.
  2. Find the paperwork: the last EICR, and certificates for work done since, such as a new fuse board, extra circuits or an EV charger.
  3. Try everything. Note any socket or light that does not work, and any socket or switch that is cracked, loose, scorched or warm, so the engineer can look at those first.
  4. Test the smoke alarms with the test button and check the date on the back.
  5. Press the test button on each RCD in the fuse board. It should switch off straight away. Switch it back on afterwards.
  6. Make sure someone can let us in and show us where the fuse board and the meter are.

Scorch marks or a burning smell? Do not wait for the inspection. Switch that circuit off at the fuse board and call an electrician.

Shops, offices and other business premises

Commercial EICRs take longer and are planned around the building. A sample of the fixed wiring is tested and the power-off time is agreed in advance; larger sites can be done in phases so the business keeps running. See fixed wire testing.

What happens afterwards

Your report is emailed to you after the visit. If anything needs doing, each item is explained and priced. See EICR codes explained for what the codes mean, and how much an EICR costs (homeowners from £156 inc VAT).

Need an EICR by a date? Tell us the property and when you need it: book an EICR or call 01727 238 999. Local pages: St Albans, Harpenden, Watford, Stevenage.

Questions we’re asked

How long does an EICR take?

Around two hours for a studio or one-bed flat, two to three hours for a two-bed home and three to four hours for a three-bed house. Larger houses take half a day or more.

How long does an EICR take on a 3-bed house?

Usually three to four hours. A three-bed house we tested in Rickmansworth in October 2026 took about three hours, including a fault fixed on the spot.

How long does an EICR take on a flat?

Around two hours for a small flat. A flat we tested in St Albans in July 2026 took 2 hours 20 minutes.

Will the power be off for the whole EICR?

No. It is off for parts of the visit, and circuits are switched off one at a time where possible. Tell us beforehand about medical equipment or anything else that must stay on.

Do I need to be there during the EICR?

Someone needs to let our engineer in and show them the fuse board and the meter. For a rented home that can be the tenant or the letting agent.

Can faults be fixed on the same visit?

Often, yes, if you approve the work. In Watford and Chiswell Green we tested the house and fixed four faults in the same visit. It adds time but saves a second appointment.

How long does a commercial EICR take?

Longer than a home, and it depends on the building. The power-off time is agreed in advance and larger sites can be tested in phases.

Written by SEGplc. Last updated 13 November 2026.

Need it done by a date?

Tell us the deadline. We’ll tell you honestly whether we can hit it — and we usually can.

Contact

Talk to SEG

Questions about a job, a certificate or a programme of works? Call the office or send a message. Head office in St Albans, serving Herts, Beds, Bucks and London.

Emailhello@segplc.comPhone01727 238 999Also on0345 3 822 833OfficeSEG House, 192 Watford Road, Chiswell Green, St Albans, Herts AL2 3EBHours7 days, 7am–10pm · call-outs every dayLeadershipMichael Simm · Russell Solts
Call nowGet a quote