- Home
- Daisy chaining extension leads
Daisy chaining extension leads: is it safe?
Why plugging one extension lead into another is a fire risk, and what to do instead.

Why it’s dangerous
- Everything shares one 13 A fuse. However many leads you chain, it all comes back to one plug in one wall socket.
- Heat builds up at every plug and connection. Loose or worn plugs get hot well below the fuse rating.
- Cable reels must be fully unwound. A coiled reel under load can overheat and melt.
- Cube adaptors plugged into extension leads add another weak joint and lever the plug out of the socket.
How much can you plug into one socket?
A 13 A socket can supply about 3,000 W in total. Add up the wattage on each appliance (it’s on the label or plug):
| Appliance | Typical power |
|---|---|
| Kettle | 2,000 to 3,000 W |
| Fan heater or oil-filled radiator | 1,000 to 3,000 W |
| Hair dryer | 1,500 to 2,200 W |
| Microwave | 1,000 to 1,500 W |
| Games console or TV | 100 to 250 W |
| Phone or laptop charger | Under 100 W |
So a kettle and a heater on one extension lead is already too much. Heaters and kettles should always go straight into a wall socket.
Warning signs
A hot plug or lead, a burning smell, scorch marks, crackling, or a breaker that trips when certain things are on. See sparking socket or burning smell.
The proper fix: more sockets
If you’re relying on extension leads, you need more sockets. Adding a double socket or two is usually a small job, and we can often fit USB sockets at the same time. See how many sockets on a ring main and small electrical jobs.
We see these faults every week. Since summer 2025 our engineers have attended more than 2,700 repair call-outs in homes and flats across Herts, Beds, Bucks and London, around 630 of them for sockets and switches and over 900 for lighting.
Questions we’re asked
Is it safe to plug an extension lead into another extension lead?
No. Daisy chaining puts everything through one 13 A plug and socket, adds more connections that can overheat, and makes overloading likely. Electrical Safety First advises against it.
How many watts can I plug into an extension lead?
A standard 13 A extension lead can take about 3,000 W in total, the same as the wall socket it's plugged into. Some leads are rated lower; check the label.
Can I plug a heater into an extension lead?
Avoid it. Heaters draw a lot of current for long periods. Plug them straight into a wall socket.
Are surge-protected extension leads safer?
Surge protection helps protect electronics from voltage spikes, but it doesn't stop overloading. The same 13 A limit applies.
How much does it cost to add a socket?
It depends on where the cable can run and how far the nearest circuit is. Send us a photo of the wall and the fuse board for a fixed price.
Written by SEGplc. Last updated 1 November 2026.
Need it done by a date?
Tell us the deadline. We’ll tell you honestly whether we can hit it — and we usually can.

